IMAMI . milk bottle sterilizer
Making milk is a simple job but takes up quite a bit of time. The required steps must be strictly indicated in terms of dosage and temperature to be able to bring adequate nutrients to the baby. With technological improvements to meet the needs of parents in the 4.0 era, smart milk maker IMAMI was born to meet a real need. In just 8s to 20s, there will be a bottle with absolute accuracy from milk volume, water volume, temperature, ..
Product salient features:
- Brew the perfect bottle of formula and temperature in seconds.
- Adjust the temperature up and down, the amount of powder, the amount of water easily and accurately each unit.
- Sterilize water with UV light.
- Warm the milk for 15 minutes and keep the bottle for 2 hours.
- Reheat food for 25 minutes and keep food for 2 hours.
- Sterilize baby bottles for 20 minutes.
Product information:
- IMAMI milk maker combines many sensor technologies with smart controllers, allowing users to adjust the temperature from 40 to 60 degrees, precisely each degree, change each unit of recipe and amount of water. In particular, the machine will automatically change the recipe when adjusting the amount of water. Thanks to this customization, parents can mix for their children many different types of milk, including Japanese milk lines that require temperatures from 55 degrees Celsius.
- The milk compartment of the machine integrates electro-optical induction technology to help measure the amount of powder with absolute accuracy. The sealed design keeps the dough from getting wet and affecting the quality of the dough. This will help users be assured of the safety of powdered milk when stored in the compartment.
- The stirring hopper of IMAMI milk maker is one of the patents of the machine. This funnel with a special design, helps to create a vortex flow to dissolve the milk more evenly, without foam, without clumps, which can be given to the baby immediately without the need to shake or stir more.
- The side of the machine has a compartment to warm bottles and food, then keep it warm for two hours. This warmer can also be used to sterilize baby bottles.
- On the right side is a water container for making milk (normal drinking water), above the water tank is a UV water sterilization unit. This disinfection will take place automatically to ensure the purity and safety of the water. You can use this water for your baby to drink using the “Drink” function of the device.
- IMAMI milk maker Smartly designed with child lock mode and bottom suction pads, making the use of the device safer with your angels.
Reference price: IMAMI milk maker for babies: VND 5.990.000
Sale link: https://www.lazada.vn/products/may-pha-sua-imami-cho-be-i236705105-s302073256.html


Tiny Baby Formula smart milk maker
In modern life. Parents are busy with very little time to take care of the baby. Especially in making milk for children, this job requires a lot of time of young fathers and mothers. If you’ve ever made baby formula, you know that this is not an easy job. At the same time, pay close attention to the right temperature for the baby to drink, while doing it quickly because of the baby’s cry for food. Get ready to say goodbye to that mess with Tiny Baby Formula smart milk maker.
Product salient features:
- Saving time for making milk is only about 5-10 seconds.
- Milk mixed evenly, no lumps.
- Plastic material is absolutely safe for health and environmentally friendly.
- Preparing formulas is as simple as ever: No need to measure milk, no need to boil water, no shaking, no time consuming.
- The recipe is prepared with absolute precision from the temperature, the amount of water, the amount of milk…
- Parts can be easily disassembled for cleaning and sanitizing.
- Freely customize the amount of water, the temperature is suitable for most milk on the market.
- CONVENIENT: It only takes 5s to make a PERFECT bottle of milk.
- PRESTIGE: Is the only dairy product in Vietnam that has all the certificates of quality according to international standards.
- SAFETY: Milk is prepared according to the recipe for ingredients and temperature.
- DURABLE: Warranty policy up to 5 years, 1 to 1 exchange within 3 months.
Product information:
- In just 5 – 10 seconds, you will have milk with the absolute exact formula from the amount of milk, water, temperature… This is really a revolutionary invention that greatly supports your child-rearing work. modern parents. Tiny Baby Formula Milk Maker is a high quality product from Japan made of PBA-free “tritan” material. And a full range of certificates according to European and International standards. You will be completely assured of your baby’s health.
- This milk maker is easy to use with a touch panel that can adjust the water and formula. (water volume: 30-300ml; water tank temperature: 37 – 55°C; milk powder tank volume: 550g)
- Tiny automatic milk maker brings convenience when completing a milk container only about 5-10 seconds. Much faster and more convenient than manual milk preparation
- With a wide range of sensors: Temperature, weight each milk container is prepared with absolute precision formula.
- With special technology, milk will not have clumps or air bubbles, 100% soluble milk.
Reference price: Japan’s No. 1 Tiny Baby Formula milk maker: VND 3.390.000
Sale link: kidmart.vn/may-pha-sua-tu-dong/55-may-pha-sua-tu-dong-tiny-baby-formula-so-1-nhat-ban.html


Automatic milk maker Koala Mama
Today, to care for the health of babies and young children, many families have used many types of milk powder both at home and abroad. However, for each different type of milk, there is a different preparation method and especially the temperature of the milk is extremely important because young children are extremely sensitive to temperature. In order to support users to solve the above difficulties, the device Smart milk maker Koala Mama was born with many smart and convenient features.
Product salient features:
- Smart milk maker Koala Mama is a device that helps parents take care of their children’s health. No longer have to do many complicated operations to make a suitable cup of milk, now users just need to press a button and everything will be processed quickly and instantly.
- If in the traditional way, users have to take many steps to make a glass of milk with the right amount and temperature, then Koala Mama smart milk maker Simply connect to the manufacturer’s app, scan the barcode and instantly collect information about that milk and adjust the water temperature precisely between 37 – 41°C.
- Powdered milk will be stored in a tray placed inside the machine with a capacity of 300g and carefully covered to prevent the milk from being exposed to the air, thereby avoiding the clumping of milk, preserving milk for 3 to 5 days. . The water tank in the machine is capable of holding 1300ml of pure water. When the water is led into the machine, it will be disinfected and just heated and cold, then exchanged vortex with each other through the spiral mechanism inside the machine and then lead to the standard water temperature as above.
- Upper drain hose Koala Mama smart milk maker Designed with a 90-degree angle and users can adjust the height of the tray according to the height of the bottle so that the milk after being poured into the bottle does not foam. The infrared sensor system on the machine is capable of recognizing the presence of the milk bottle on the machine. The motor in the machine works extremely smoothly with a maximum sound intensity of only 60dB while the normal intensity level is only about 40dB, absolutely not affecting the small children in your home. The machine is suitable for producing milk for bottles with a capacity of 30 – 130ml.
Product information:
- Koala Mama smart milk maker is designed with compact size (270 x 218 x 360mm) and weighs only 300g. The extremely modern appearance of the machine is processed by CNC technology. Therefore, every line and design on the machine is skillfully and meticulously processed with high perfection. Basically, the machine consists of a milk powder tray that can be removed from the machine, a water tank and a trigger motor for the machine to work. The front of the machine is designed with two control buttons with a space in front of the machine for the user to put the milk cup in that position like most other automatic dispensers.
- Koala Mama smart milk maker is mainly made from Tritan TX2001 plastic material that meets European standards. Even when the temperature in the machine is up to 109 degrees Celsius, this material absolutely does not produce harmful BPA (Bisphenol A) like common plastic used in the industry to produce hard plastic bottles and containers. food. With such quality assurance, the device has been certified by the US FDA for safety, so users can rest assured.
- Not only that, the machine is also used 316 stainless steel material, which is resistant to rust, corrosion and alkali with anti-rust features superior to 304 steel, which is a type of steel used in production. manufactures high-end medical equipment. In particular, the machine is also equipped with a button to activate the sterilization of pipes in the machine by using high-temperature water to disinfect. When using, users can disassemble the milk tray, water tank for cleaning and use the high-temperature flushing system in the machine to disinfect.
Reference price: Contact: 1900.2667
Link for sale: http://chiemtaimobile.vn/may-pha-sua-thong-minh-koala-mama.html


Baby Brezza Formula Pro Advanced
In modern life, parents are busy with very little time to take care of the baby, especially in making milk for the baby. This job requires a lot of time of young parents. It is for this reason that Baby Brezza milk maker was born with the expectation to meet the needs of making milk quickly for babies. With American Baby Brezza Formula Pro milk maker, Now parents will not spend a lot of time preparing infant formula, all work will be done with just a click of a button to make the machine itself.
Product salient features:
- Baby Brezza Formula Pro milk maker Able to boil and mix milk according to the exact recipe at the push of a button.
- Baby Brezza milk maker uses patented technology to measure, dispense, and mix water and powdered milk to the perfect and consistent temperature. With a button on Baby Brezz milk makera, you can make a cup of milk in seconds without air bubbles.
- Water and milk are stored right in the machine, so it’s always ready for you when your baby is hungry. Baby Brezza Formula Pro milk maker Fits all bottle sizes and all brands of milk powder in the world.
Product information:
- Material: Plastic, BPA free absolutely safe.
- Suitable for a wide range of milks you don’t have to measure, don’t mix, waste no time.
- Patented mixing technology: mix milk and water for perfect consistency without air bubbles.
- Temperature control: heats water to 98 degrees F (about 37 degrees C – the optimal temperature for babies to drink like breast milk).
- The sealed milk storage compartment can hold 700g of powdered milk to prepare 20 bottles of mixed formula with a volume of 8 ouce (approximately 240ml). Should be cleaned on a regular basis for effective performance.
- Milk levels can be mixed: Equivalent to 60ml, 120ml, 180ml, 250ml, 300ml.
- Water tank capacity: 1,5 Liters.
- The machine always prepares milk at a temperature of 37 degrees Celsius.
- The machine has a very simple structure and usage, the upper part is a closed compartment to store milk. It can hold 700g of milk to prepare for 20 240ml bottles. The part next to the machine is a water tank with measuring lines, which can hold up to 1,5 liters of water. The amount of milk after mixing will be flowing from a nozzle shaped like a funnel. The bottle will be placed in the base right below the faucet, especially you can adjust the height of the base to match the shape of the bottle. The control button has buttons 2, 4, 6, 8, 10 units are calculated in ounces (1 ounce = 30 ml), you just need to select the amount of milk you want to mix and then press start to have a bottle of milk for your baby to drink. right. Next to the status light, the green indicator light means the water is at a usable temperature, if the yellow indicator is heating, if the green and yellow flashes, the water is too hot or too cold, wait a few minutes to use it. The machine has the ability to control the optimal temperature for feeding the baby about 37 degrees, close to body temperature (the temperature of breast milk).
Reference price: Baby Brezza Formula Pro Advanced milk maker: VND 5.390.000
Link for sale: https://babybrezza.vn/cua-hang/may-pha-sua-baby-brezza-formula-pro-advanced-the-he-thu-2/


Handy milk maker X-BABY
Handy, automatic, versatile milk maker X-BABY It is an effective solution for mothers in taking care of their young children. With this device, mothers will have a warm milk part immediately, ensuring the correct temperature, right formula in a short time. Let your child not have to wait long, not be hungry and live according to the schedule.
When making milk according to the traditional method, we will have to boil the water, let it cool 1 part, and keep 1 part hot. Then, take the hot water, mix it with the cold water, so that one part of the water has an ideal temperature of 40 degrees Celsius. Then put it in the jar, then pour in each spoon of milk. If all goes well, the baby will have milk to drink. But often, this way of hand mixing often makes mistakes such as: mixing too much hot water, or too much cold water in the bottle. This leads to the loss of an additional cooling stage, and too much cold water is mixed, the milk is not hot enough to cook, we have to throw it away to ensure the health of the baby. Very waste of time and money.
Product salient features:
- Handy milk maker X-BABY designed in a fun and easy way in the shape of a cluster of mushrooms. The mushroom cap can hold up to 500g of powdered milk. So that mothers can use and mix up to 15 bottles with a capacity of 240ml. As for the side used to store water, the maximum water level that can be achieved is 1200ml.
- There are 2 levels of heat retention: hot water 100 degrees Celsius, warm water 45 degrees Celsius.
- What if the water tank runs out of water? Then the water indicator light will turn on, to remind the mother to add water to the bottle. Guaranteed against running out, against lack of water when needed, and against fire due to too dry.
- When making milk, the mother can automatically increase or decrease the number of tablespoons of milk to be mixed. The machine will receive the command and do exactly as the mother asked. The milk produced by the machine does not form residue, and ensures complete dissolution because the inside of the machine has a very evenly stirred spoon.
- Cleaning the machine is also very simple, you just need to disconnect the power and carry out cleaning steps from the inside out with a soft cloth.
Product information:
- Milk powder container: 500g
- Water tank: 1.2 liters
- Use voltage: 220V – 50Hz
- Power consumption: 800W
- Weight: 3.8 Kg
Reference price: Contact
Link for sale: http://babyborn.vn/hang-nhap-tu-viet-nam/may-pha-sua-tu-dong-da-nang-x-baby.html


Haier milk maker HBM-F25
Haier milk maker HBM-F25 is an automatic milk maker product that is being trusted by many mothers in Vietnam. Haie automatic milk makerr has many outstanding functions that make formula-feeding mothers not to be missed. The right wing of the machine is a water compartment for making milk, on the top is a UV water sterilization unit. With this function, you can comfortably let your baby drink because it has ensured the purity and safety of the water.
The other side is used to warm bottles and food. Even sterilizing baby bottles. In particular, the stirring hopper of the machine has a quite unique design. Can help create a vortex flow to dissolve milk more evenly. Instead of clumping like the usual way of mixing.
Product salient features:
- Haier milk machineWith automatic boiling and cooling mode, the water automatically reaches the appropriate temperature that you can adjust yourself through the setting system quickly.
- Haier milk maker HBM-F25 Made from 304 stainless steel in the core and the shell is made of safe, non-toxic PP plastic.
- Haier milk maker HBM-F25 Smartly designed with a lid made of anti-scald material. Along with automatic shutdown mode when the water tank is empty.
- Haier milk maker there is automatic mode of chlorine filtering to ensure safety and cleanliness. Instead of having to use vinegar to clean chlorine residue, Haier milk maker It has an automatic cleaning function that saves you a lot of time and effort
- Haier automatic milk maker It has a water tank of up to 2 liters.
Product information:
- Brand: IMAMI
- Made in China
- Capacity: 500W
- Dimensions: 36 x 22 x 39 cm
- Material: Tritan, ABS plastic
- IMAMI milk maker has a sturdy appearance, highlighted by elegant gray-white color. The device can fully meet the actual milk production needs from only 8 – 20 seconds.
Reference price: Haier Hbm-F25 Milk Heater: Contact
Link for sale: junbaby.vn/may-ham-dun-nuoc-pha-sua-haier-hbm-f25.html


Shile baby automatic milk warmer 1000W
Today, to care for the health of babies and young children, many families have used many types of milk powder both at home and abroad. However, for each different type of milk, there is a different preparation method and especially the temperature of the milk is extremely important because young children are extremely sensitive to temperature. In order to support users to solve the above difficulties, the device Shile baby automatic milk warmer 1000W was born with many smart and convenient features.
Product salient features:
- Shile baby automatic milk warmer 1000W is a device that helps parents take care of their children’s health. No longer have to do many complicated operations to make a suitable cup of milk, now users just need to press a button and everything will be processed quickly and instantly.
- Moreover, in addition to the automatic milk-making function, this is also a milk warmer, so it is very convenient for busy parents with work.
- Powdered milk will be stored in a tray placed inside the machine with a capacity of 300g and carefully covered to prevent the milk from being exposed to the air, thereby avoiding the clumping of milk, preserving milk for 3 to 5 days. . The water tank in the machine is capable of holding 1300ml of pure water. When the water is led into the machine, it will be disinfected and just heated and cold, then exchanged vortex with each other through the spiral mechanism inside the machine and then lead to the standard water temperature as above.
- The discharge nozzle on the Shile smart milk maker is designed at a 90-degree angle and the user can adjust the height of the tray according to the height of the bottle so that the milk after being poured into the bottle does not foam. The infrared sensor system on the machine is capable of recognizing the presence of the milk bottle on the machine. The motor in the machine works extremely smoothly with a maximum sound intensity of only 60dB while the normal intensity level is only about 40dB, absolutely not affecting the small children in your home. The machine is suitable for producing milk for bottles with a capacity of 30 – 130ml.
Product information:
- Product: Shile automatic milk maker
- Power: 800W
- Capacity: 1200ml
- Voltage: 220V
- Dimensions: 230 x 180 mm
- Weight: 1.2kg
Reference price: Shile 1000W automatic baby warmer milk maker: VND 940.002
Selling link: shopee.vn/Milk-making machine-automatic-cum-warmer-Shile-1000W–King-Of-Prussia-i.183556821.5111041683


Burabi . smart milk maker
In modern life, parents are busy with very little time to take care of the baby, especially in making milk for their children, this job requires a lot of time for young parents, that’s why. Burabi . Milk Maker was born with the expectation to meet the needs of making milk quickly for babies. With Burabi . Milk Maker, now parents will not spend a lot of time to prepare infant formula, all work will be at the touch of a button to make milk.
Product salient features:
- Burabi . milk maker Able to boil and mix milk according to the exact recipe at the push of a button. Uses patented technology to measure, dispense and mix water and powdered milk to the perfect and consistent temperature.
- With one button on Burabi . milk maker you can produce a cup of milk in seconds without air bubbles. Water and milk are stored right in the machine, so it’s always ready for you when your baby is hungry.
- Burabi . milk maker milk can be mixed at a temperature of 35-70°C, can mix all types of milk from America, Europe, Australia, Asia (including Japan), can be mixed from 30ml to 240ml without having to be fixed.
- Burab . milk makerCompact, luxurious design helps to enhance your family kitchen.
- The machine has the ability to self-clean unlike other milk machines, after each milk preparation, parents have to clean and sterilize the mixing equipment.
- The machine can take water according to the desired temperature and amount of water.
- The device is connected to the phone. So it’s very convenient.
- If the baby drinks milk, the mother scans the barcode once and it’s done. The App has memorized the formulas of each type of milk.
- The app can also track your baby’s milk intake within a day. Save your child’s weight and height in the app, parents can track their children day by day and month by month.
Product information:
- Burabi milk maker can make milk at a temperature of 35-70°C, can mix all types of milk from America, Europe, Australia, Asia (including Japan), can mix from 30ml to 240ml without effort. phase rating.
- The machine has a weight of 4 kg.
- Material: PP, Tritan/Food grade silicone/Food grade ABS. The milk storage compartment can hold 400g of powdered milk, 1.7L of water.
Reference price: Burabi milk machine: 6.250.000 VND
Sale link: http://burabi.com.vn/product/may-pha-sua-thong-minh-burabi/

